Club G40 Forum
Technical => Engine and Transmission => Topic started by: juan on December 22, 2008, 12:15:05 pm
-
The radiator fan in the g40 ive just bought is buggered and i was just wondering if its ok to replace it with a fan from a mk3 1.3 cl?
-
just the fan or the motor? The normal 1.3 one wont be twin speed. the actual plastic fan that sits on the motor is the same though.
-
Its the motor thats gone, and ive got a spare cl fan setup lying about
-
ok, well it's GT/G40 specific. you'll prob find that the fan motor you have spare only has a 2 wire connector?
-
ok, well it's GT/G40 specific. you'll prob find that the fan motor you have spare only has a 2 wire connector?
Lol i just tried plugging the cl fan motor into the g40 loom and it doesn't go in due to the plastic notches bieng different.
-
yeah because I like say, it'll only have two connectors in it! Where as the GT/G40 has three.
-
i'm sure the G40 fan has more blades than a CL or GT. doesn't the GT/CL fan have 3 blades and the G40 4 blades?