I'm really pleased yes, and I believe in my my man's dyno too, he does a lot of custom builds and you get to see the before and after results on stock vehicles and it's close - actually reads many factory cars at less than manufacturer ratings. Well trusted round our way anyway. The bottom end's weaknesses - Just that it's obviously slightly worn as it's letting by on no3 piston (did leakage test) and it's blowing a lot of oil into my breather catch tank, I have vented the aux air valve to atmosphere to stop boost getting through this way, took block breather check valve out and vented both this breather and rocker breather into catch tank and it's blowing oil out the tank and into engine bay.. I am looking for a bottom end to build up to fix this, never showed any issues with G Lader but this amount of boost is finding any leaks.. Need to fix before I go any further, I think it will do more as the air temps are staying low and it's not showing any sign of flow issues and the K04-015 is holding boost all the way 'til it limits.. Just my injectors are almost maxed at 89% (350cc/3bar) but I've since discovered that no3 plug is rather white so I think I have a lean injector and the other 3 are making it smell right at the exhaust, didn't think 350's would be so high duty wise on such a small motor.. Going to try some of those Hong Kong £99 440cc specials next time hehe
I'm a chinese junk fan! After all, these guys make a lot of stuff for the big names to put their stickers on.. I bought the G40 I broke up off a guy on here a couple of years back that had a well sorted platform (Leon Britton J350 RBR) and only know it has a fast road clutch of some description.. It seems to have all the bits he said it had.. 1341 etc. I had to laugh at the claimed 165bhp though.. I took it home - I think he sold it as he could never get it to run right - Got it on the dyno and it was 87bhp!! Had the wrong dizzy on that was 7deg retarded at max advance, ran cooking hot for obvious reasons, cooling fan was hard wired, thermostat was missing and he'd replaced every sensor. The dizzy would have fixed all of this. I quickly decided to run DTA managment etc, It has worked well for me..