Got my car to a state where i can crank it over, just wanted to see if it would
and it didnt.... Nothing at all, no fuel pump prime or anything, just dash lights and on the 3rd click nothing, checled voltage, is fine, checked voltage when attempted cranking and it went up. So the starter isnt even trying
i noticed on the starter there is two spade terminals? I used the one nearest the engine, is this correct? Im sure thats the one i took it off
the big thick black lead and smaller red with black stripe both bolt on the starter positive?
the blue wire thats in the same loom and goes to the alternator, is that anything to do with it? As i dont have my alternator connected yet
many thanks