« previous next »
Pages: 1 [2] 3 4 5   Go Down

Author Topic: PSD EATON KIT - What boost pressure does this create?  (Read 13924 times)

Offline youngprodigys

  • Members
  • *****
  • Posts: 545
  • G 3URO
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #15 on: April 21, 2010, 01:25:14 pm »
how many teeth on the pulleys mate?
Logged

Offline polo classic

  • Members
  • *****
  • Posts: 265
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #16 on: April 23, 2010, 12:36:07 pm »
Quote from: youngprodigys on April 21, 2010, 11:00:43 am
if only it was that simple mate!

Why isn't it? You know you can run abit more boost than 1 bar on the standard mapsensor right? I  have mapped 16vT's with G60 digifant running 1,4 bar (20 psi)
Logged

Offline poloeatonm45

  • Members
  • *****
  • Posts: 287
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #17 on: April 23, 2010, 12:47:41 pm »
mine is the smaller pully with 24 teeth
Logged

Offline Yoof

  • Traders
  • *****
  • Posts: 2355
  • I know naathing..
    • Polo Performance Parts
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #18 on: April 23, 2010, 01:28:18 pm »
Quote from: polo classic on April 23, 2010, 12:36:07 pm
Quote from: youngprodigys on April 21, 2010, 11:00:43 am
if only it was that simple mate!

Why isn't it? You know you can run abit more boost than 1 bar on the standard mapsensor right? I  have mapped 16vT's with G60 digifant running 1,4 bar (20 psi)

No doubt- but to have any resolution in the map the 200kPa sensor is only good for 1bar. Also by running above this you'll be streaching the diaphram too...

Basically don't be a pikey for the sake of a £35 sensor  ;)
Logged

Offline youngprodigys

  • Members
  • *****
  • Posts: 545
  • G 3URO
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #19 on: April 23, 2010, 05:33:10 pm »
Quote from: poloeatonm45 on April 23, 2010, 12:47:41 pm
mine is the smaller pully with 24 teeth

so really i am looking at 19psi arnt i!

Quote from: polo classic on April 23, 2010, 12:36:07 pm
Quote from: youngprodigys on April 21, 2010, 11:00:43 am
if only it was that simple mate!

Why isn't it? You know you can run abit more boost than 1 bar on the standard mapsensor right? I  have mapped 16vT's with G60 digifant running 1,4 bar (20 psi)
well i had a rallye that had a 250kPa map sensor in standard so it could run 20psi - i have a 200kPa so i know it wont!

yoof - pm'd
Logged

Offline youngprodigys

  • Members
  • *****
  • Posts: 545
  • G 3URO
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #20 on: April 23, 2010, 05:39:37 pm »
Quote from: poloeatonm45 on April 21, 2010, 01:03:48 pm
i have a home brew eaton kit with a psd toothed supercharger pully and it runs around 19-20 psi with a 51mm throttle body.

this with an eaton cam mate?
Logged

Offline poloeatonm45

  • Members
  • *****
  • Posts: 287
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #21 on: April 25, 2010, 10:42:48 pm »
no its with the standard cam, i have an eaton cam but it wont run right in my engine so i have had to take it out

steve
Logged

Offline youngprodigys

  • Members
  • *****
  • Posts: 545
  • G 3URO
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #22 on: April 26, 2010, 12:57:42 pm »
Quote from: poloeatonm45 on April 25, 2010, 10:42:48 pm
no its with the standard cam, i have an eaton cam but it wont run right in my engine so i have had to take it out

steve

well i have been talking to andy about mapping this and he is suggesting that i go back to the standard cam for getting it through an MOT, before he can map it properly. i am tempted to do this now. Mr Pitt truely left me up sh1t creak without a paddle - WHAT A WASTE OF MONEY!
Logged

Offline vwmk3jon

  • Members
  • *****
  • Posts: 1426
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #23 on: April 29, 2010, 02:49:17 pm »
Mines got the 1341 eaton cam in and it got through a MOT just fine. No problems with the emissions whatsoever and it was running like a right bag of nails!
Logged

Offline poloeatonm45

  • Members
  • *****
  • Posts: 287
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #24 on: April 29, 2010, 09:54:42 pm »
does anyone know what the differences are between the 1272 eaton cam and the 1341 eaton cam? is it stamped on the end?? would a 1341 cam run in a 1272 engine and vice versa??? im wondering if i have a 1341 cam and thats why it wont run in my car. is their any marks  on the 1341 that aint on the 1272 cam.

also i spoke to steve pit about my cam just after they stopped trading and he said the cylinder pressures with the standard cam are silly high thats why they made the eaton cam. i dont know how much of that is true but he had no reason to lie to me

steven
Logged

Offline vwmk3jon

  • Members
  • *****
  • Posts: 1426
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #25 on: April 30, 2010, 11:22:19 am »
The 1272 eaton cam that i sent to Robin had no markings on it iirc. I'm not sure if the 1341 item did either :???:
Logged

Offline PeteG40

  • Administrators
  • *****
  • Posts: 4037
  • Housewives heart throb
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #26 on: April 30, 2010, 11:29:33 am »
the no marking '1272 eaton' cam u sold me jon was a 1341 g40 cam
Logged

Offline Andy

  • Traders
  • *****
  • Posts: 1503
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #27 on: April 30, 2010, 02:23:01 pm »
Quote from: vwmk3jon on April 29, 2010, 02:49:17 pm
Mines got the 1341 eaton cam in and it got through a MOT just fine. No problems with the emissions whatsoever and it was running like a right bag of nails!
But yours is a '91 car Jon, and doesn't have to sit the catalyst emissions test - so the limits are much wider than for later cars.
Logged

Offline youngprodigys

  • Members
  • *****
  • Posts: 545
  • G 3URO
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #28 on: May 02, 2010, 04:37:32 pm »
Quote from: poloeatonm45 on April 29, 2010, 09:54:42 pm
does anyone know what the differences are between the 1272 eaton cam and the 1341 eaton cam? is it stamped on the end?? would a 1341 cam run in a 1272 engine and vice versa??? im wondering if i have a 1341 cam and thats why it wont run in my car. is their any marks  on the 1341 that aint on the 1272 cam.

also i spoke to steve pit about my cam just after they stopped trading and he said the cylinder pressures with the standard cam are silly high thats why they made the eaton cam. i dont know how much of that is true but he had no reason to lie to me

steven

yes he said is was allowing overlap - so the boost was momentarily skimming over the psitons to help reduce some of the pressure and cool the cylinder down by pushing the hot air out. well thats what he said to me anyway - but he said a lot of things
Logged

Offline vwmk3jon

  • Members
  • *****
  • Posts: 1426
Re: PSD EATON KIT - What boost pressure does this create?
« Reply #29 on: May 02, 2010, 08:11:52 pm »
Quote from: PeteG40 on April 30, 2010, 11:29:33 am
the no marking '1272 eaton' cam u sold me jon was a 1341 g40 cam

News to me. I could only tell you what i knew.
Logged
Pages: 1 [2] 3 4 5   Go Up
« previous next »