Club G40 Forum
Classifieds => Parts for sale => Topic started by: 40cent on May 10, 2011, 10:40:43 pm
-
Needing to free up a bit of space so have a few bits for sale if anyone interested.
1. G40 engine. Complete block, head and flywheel only. Engine had covered 100k before being removed from car which ran sweet as a nut.
Exhaust manifold and charger bracket currently attached. £400 **sold sold**
2. G40 block with damage to piston 4. This has caused slight scoring to the cylinder but might get away with a resleeve or ideal rebore etc. £100
3. Polo 8p gearbox. Not sure which model mk 3 this is from but used on a g40 gives shorter gears/faster acceleration. £90
All items are a bit hefty so collection from preston would be prefered
Any questions please feel free.
-
You ain't got a cylinder head for sale have you?
-
Not at the moment but I might have a spare one coming up. I can let you know
-
Where abouts are you mate, poss interested in the damaged block.
-
says preston on the add!
-
doh !
-
Would you be willing to split the first engine? That way I could take the block and Robin could take the head.
-
i have a bottom end and head for sale check my for sale thread!
-
am wanting the complete engine when would it be possable to come.
-
Not to worry about the head, got a brand new one from ebay.
-
Disregard my question now, took the block being sold by cheddarcheese.
-
Not to worry about the head, got a brand new one from ebay.
How much did you pick that up for matey and did you get it from a eBay shop or....??
Cheers Jake.
-
hi mate am really wanting the complete engine can you please let me know,many thanks craig.
-
Not to worry about the head, got a brand new one from ebay.
How much did you pick that up for matey and did you get it from a eBay shop or....??
Cheers Jake.
£150 delivered with all new valves, tappets and cam. I will only use the head.
-
BRAND new?!? pics or it didn't happen!
-
Like hayesey said is it really brand new get some pics up, especially for £150. I have been searching everywhere for heads as I needed one for my rebuild. I paid £108 from a breakers couldn't find a new anywhere.
-
Yup brand spanker!
Got it today, ebay number 270740427955.
Part number is 030103265BX which i believe is for an NZ engine which is a 1.3 IIRC.
I'll just swap the exhaust valves over and lap them in.
If it turns out to be a 1.0 litre head then i have cocked up however the seller is ok for it to be returned if it is wrong.
-
Just comparing it to mine that I took of my G40, fair play looks pretty similar to me mate.
Could be on to a winner, cheap as fook as well if it's brand new
-
it's off a mk2 that, can see the fuel pump drive lobe on the cam. You'll have to block up the fuel pump hole with a plate but otherwise ebay has given you some nice head
-
Yup brand spanker!
Got it today, ebay number 270740427955.
Part number is 030103265BX which i believe is for an NZ engine which is a 1.3 IIRC.
I'll just swap the exhaust valves over and lap them in.
If it turns out to be a 1.0 litre head then i have cocked up however the seller is ok for it to be returned if it is wrong.
the exhausts and inlets are different on a g40 (not by much but diff part number on the inlets and slightly longer). personally i'd get a machine shop to cut them in
-
I'll swap the valves over and lap them in.
Good head is always well worth having!
-
Cylinde head is all good. Has 8mm valve guides and doesn't need the fuel pump blank either. Happy days. Had it skimmed today so it's ready to have some G40 valves lapped in.
(http://i19.photobucket.com/albums/b155/robinyau/cbcf0a31.jpg)
(http://i19.photobucket.com/albums/b155/robinyau/5d6091f0.jpg)