Hi guys
been thinking of putting a few things back to standard on my g40 and was needing some input. as its been a very long time since all the mods where done to the car.
so I am thinking of putting the airbox back on and all the standard connections to the charger and throttle body.
I just cant remember where some of the connections go from the throttle body.
where do the other two ends of that pipe go, one to throttle body one or rocker cover
any pictures that can help will greatly appreciate
I have attached a picture of a standard g40 to show the part i am not sure where all the connections go
if i put the airbox back in do i need to reconnect the charcoal cannister as well?
currently I have
PSD tooth belts
PSD throttle Body dewedge and ported
one charger inlet blocked off
One charger inlet to filter
oil cooler
breather pipe mod i think, with mocal catch tank.
these are not all my mods just ones in that area
if i put back the airbox and the throttle pipes I will have to remove the breather mod correct,
so apart from the lose of bhp can anyone see a issue with me doing this in the running of the vehicle
will try and get a picture of my engine tomorrow