g40 engine parts

[dcc]

Looks like I will have a complete g40 engine for sale soon. One of the pistons melted, causing scoring to the bore. Needs either re borring to a larger diameter piston or needs to be sleaved (£100 to be sleaved + cost of a new piston). The head has a schrick g40 cam, 3 angle valve seats etc... there are slight cracks in the head between one inlet valve and the spark plug, and 4 of the exhaust valves and the spark plug. The crank is in very good condition, as well as the 4 conrods and 3 remaining pistons.

Also have g40 exhaust manifold, inlet manifold, a set of either g40 or g60 injectors (depending on what I decide to use).

Also, what is a rough price on a standard charger, un abused etc...

If anybody is after any parts then please get in touch via pm or leave a message here and next time I check ill reply to you

I will take photos to show exactly the damage to the engine, and can get photos of everything else if needed.

[PeteG40]

i've heard (not sure if its true) that there isn't enough metal to successfully sleave a g40.. The maximum over bore is 2mm before you get to tge water jacket etc.  So a 1mm sleave i wouldnt think is doable.

The block is only therefore suitable for an overbore

[dcc]

Pete I was told by an engine specialist here in South Wales that it would be possible to sleave the engine, as  I was going to have it done, untill my mechanic sourced another engine to use so we went along this route. The quote was £100 to sleave the engine, I personally am no engine builder but take the knowledge of somebody who has been rebuilding engines for 40+ years. I will ask him about the water ways next time I can get a hold of him (hopefully tomorrow).

[dcc]

pending collection in week, the block has been sold.

[dcc]

The charger has been serviced, which I did not know about. It has Jabba Sport markings - JS 362 S4, rebuilt on the 02-02-01. So it is a stage 4 ported charger with a full rebuild. The engine had 78k on it when it was taken from the car.

If you are interested, give me pm and ill reply asap

pictures soon

Cheers
Dan

[dcc]

Block and supercharger have gone!

[sinister polo]

hi mate,

dont suppose you have still got the plastic boost hose that goes to the throttle body?

[DKnight]

yeah its going in the bin otherwise, £10 posted?

[dcc]

Sorry, don't think I have this boost hose

[dcc]

pending payment, the head, inlet, injectors and cam are sold

[Weeman]

pending payment, the head, inlet, injectors and cam are sold

Now sold

[g40_kris]

ecu? posted