Club G40 Forum
Technical => Turbochargers => Topic started by: Max on April 14, 2009, 09:51:47 pm
-
Chaps,
What sort of air filter set ups are you running? I was thinking just a reducer off the turbo onto a bigger straight pipe attached to the filter. Or maybe work one around something like a Jabba heatshield and filter combo?
Any ideas and pictures would be great!
-
mines a bit of a mish-mash of bits really. The inlet to the turbo is tiny really. I've got a piece of 44mm ID silicon which fits onto the turbo inlet. Then clamped two pieces of progressively bigger silicon bits I had knocking about in my garage over the top of that, the end result was then big enough to clamp on the ducting and filter I already used with the g-lader. You could probably buy a reducer that would look nicer but I just used what I had lying about for the time being.