Got new discs & pads now, along with a G40 airbox, so the list of parts to buy is small now.
Loom was next for some attention, a previous owner had done some interesting 'repairs' - no wonder it had a few running issues.
Loom started like this:
Removed the insulation tape from it
:
That revealed some gems:
Luckily work have the correct connectors, so a few crimps later:
Bit of soldering:
Some heatshrink:
Job jobbed:
Had to do that on a few connectors- but loom is good now, all connectors cleaned too.
Wrapped in pukka loom tape and ready to go back in the car:
Cheers
Pete