« previous next »
Pages: [1] 2   Go Down

Author Topic: G40 block and ECU  (Read 4195 times)

Offline brownysblower

  • Posts: 36
G40 block and ECU
« on: April 28, 2011, 07:27:16 am »
Hi has anyone got a G40 block and ECU for sale  
only need block my crank and rods are ok
many thanks
chris
« Last Edit: June 17, 2011, 07:30:38 am by brownysblower »
Logged

Offline brownysblower

  • Posts: 36
Re: G40 block
« Reply #1 on: June 07, 2011, 08:58:33 pm »
Has no one got a used block they want to sell, need an ecu as well
Logged

Offline Jezza-7

  • Members
  • *****
  • Posts: 3832
Re: G40 block
« Reply #2 on: June 07, 2011, 09:06:02 pm »
Are you going to rebore it? I have 2 blocks and both need rebore.
Logged

Offline brownysblower

  • Posts: 36
Re: G40 block
« Reply #3 on: June 07, 2011, 09:46:19 pm »
I would be interested in the block with melted piston
i could get interlink to pick it up if you could clean it up of it oil and pack it in wooden box or small crate
 many thanks
chris

ps you got same bollox from brian at jabba as i did
but i had receipt and witnesed them dropping my ECU but still get fook off and i have been customer for 10 years
Logged

Offline Jezza-7

  • Members
  • *****
  • Posts: 3832
Re: G40 block
« Reply #4 on: June 07, 2011, 10:47:03 pm »
Will let you know which one mate as i need to see which one im gonna use.
Logged

Offline brownysblower

  • Posts: 36
Re: G40 block and ECU
« Reply #5 on: June 17, 2011, 07:34:23 am »
Hi all has anyone got a block or ecu at all
many thanks
chris
Logged

Offline youngprodigys

  • Members
  • *****
  • Posts: 545
  • G 3URO
Re: G40 block and ECU
« Reply #6 on: June 17, 2011, 08:07:44 am »
whats up with your ecu? you say they dropped it - did it snap the board inside?
Logged

Offline Insight G40

  • Members
  • *****
  • Posts: 226
Re: G40 block and ECU
« Reply #7 on: June 19, 2011, 11:18:35 am »
I've got an ecu, located in Alton, Hampshire.

£100 ono
Logged

Offline brownysblower

  • Posts: 36
Re: G40 block and ECU
« Reply #8 on: June 23, 2011, 07:41:32 am »
Many thanks I will have ecu pm me your location and phone number and i will come over and collect



the map senser part of board is broken as map senser works but fueling is static
Logged

Offline vwmk3jon

  • Members
  • *****
  • Posts: 1426
Re: G40 block and ECU
« Reply #9 on: July 03, 2011, 06:12:57 pm »
i've got a ECU for sale too ;) In parts for sale section
Logged

Offline Peterpolo

  • Members
  • *****
  • Posts: 27
Re: G40 block and ECU
« Reply #10 on: July 19, 2011, 06:05:20 pm »
I got 2 blocks aswell both need attention! Both went bang and was told it was the bottom end, (not my neck of the woods) so will prob need re-boring and crank etc?? And I got a ecu I dnt use but not too sure about parting with it how much wld u pay? How much are they worth?
Logged

Offline ereeiz

  • Members
  • *****
  • Posts: 972
Re: G40 block and ECU
« Reply #11 on: July 20, 2011, 12:03:15 pm »
One of those "however mush you're willing to pay" situations. I've seen a few sell for £30, and more sell for closer to £100, depends on the old supply/demand thing. I tried flogging a remapped ECU about 18months ago, think it ended  on £15 on ebay with no bids. I'm gonna use it soon though and they're a pain in the ass to get hold of when they die so I'm keeping it now :D lol
Logged

Offline brownysblower

  • Posts: 36
Re: G40 block and ECU
« Reply #12 on: July 22, 2011, 05:07:11 pm »
Hi Have got an ECU now
What are the blocks like ie melted pistons or fooked crank
ps where are you
many thanks
chris
Logged

Offline brownysblower

  • Posts: 36
Re: G40 block and ECU
« Reply #13 on: August 02, 2011, 01:23:28 pm »
Bump !!!
Logged

Offline Jezza-7

  • Members
  • *****
  • Posts: 3832
Re: G40 block and ECU
« Reply #14 on: August 02, 2011, 06:32:50 pm »
You want that block? Needs a rebore and will come with crank. Rods had to be used for my engine as 1 rod had been melted and the other had suffered damage from the piston problem i had.

Logged
Pages: [1] 2   Go Up
« previous next »