Club G40 Forum
Technical => Engine and Transmission => Topic started by: boyzey on February 06, 2010, 09:40:23 pm
-
hiya people just after some advice reli,
i am afta a set of 65mm toothed pulleys now and i hear PSD are the best. because ther lighter than german ebay ones, just correct me wen im rong please haha i dont no much about them you see, just want to no wat set will fit and work the best haha.
and if any one is selling any please let me no im interseted cheers boyzey
-
http://cgi.ebay.co.uk/VW-Polo-G40-PSD-Supercharger-Toothed-Pullies-lader-65mm_W0QQitemZ320484043086QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item4a9e56694e
Here are mate brand new too. Expect to pay £200+ as they are new. I reckon these will go for £250-£300 as 2nd hand ones go for around £200.
These will fit fine but ideally you need something i cant remember what it is called on the alternator pulley to prevent the belt come off.
They are the best really and very hard to get hold. I cant think that there are many that were made and are still around as the phase 1's wear quicker.
-
Ah you need provision guides for the alternator pulley.
-
What you could do is buy some pulleys from RS components and get someone to machine them down for you. Think I made myself a set for about £50
-
cheers jezza 7 they look good and yes it says on these that ther is the holes for the guides on the altinator pulley. does that mean you can just buy some guides from some wer or is it a case of make your own?
and justin i dont think id no wich pulley to start with and wer to go from there lol, but its a option cheers
-
I dont know if you canj ust buy them, they usually come with them already on. I was looking at buying some a little while ago and that already had the guide on it so i dont know what the seller has done with them. You could always get the kit and then get some really big washers and get it made to fit and cut to size. Unless anyone knows if you can get hold of them elsewhere?
-
Has anyone tryed RPM Tuning toothed belt kits?
-
Are they the micro vee belt kit?
Or the ones that say they arent available?
-
the ones that are not available well was last time i looked. What i would like to know is whats is wrong with the german ones and why everone goes for the psd toothed belt kits as im going to looking to get a set in a few months time. The only germen kits i would not get is the steel ones.
Cheers Daryl
-
most if not all german ones i've seen are steel... hence why people like psd ones, lighter!
-
Yeah that is right pete. The only ally ones you can get are on rpm but it says the currently not available. I emailed them months ago and never got a reply. Only ally ones i know that are easy to get hold of is micro vee kits but there not toothed, altough is still allows the charger to slip and wont do damage if it you hit the rev limit.
-
Right these sold for £215 in the end which was good. Does anybody knowthe seller. His name is juan and was wondering if this is the same fella who used to be off here?
-
Right these sold for £215 in the end which was good. Does anybody knowthe seller. His name is juan and was wondering if this is the same fella who used to be off here?
its same guy who got banned, yes
-
Ah thouht so, was checking.
-
its same guy who got banned, yes
Why was he banned?
-
I have nothing against him but have a read of this.
http://www.polog40.co.uk/forum/index.php/topic,3094.0.html
-
he has offerd me anuther new set with guides on these ones though, is ther anything els i would need to run them uther than a chip and a belt do some have a spacer for one pulley or something, and i dont no wether to trust the guy now but thanx for the warning guy
-
He has also offered me some as well but im being carefull, as in he only lives down the road so i would go and get them and give him cash just to be safe.
-
Did he contact you through ebay?
-
ye through ebay mate how many sets does he have lol, ye if i only lived down road id be straight down lol just i live in yorkshire fuking miles away haha, do you no about this washer that i culd possibly need jezza as the set i have been offerd doesnt have it,
-
i dont no rae way hu is croften lol
-
haha no not me mate, never heard ov the place lol im a yorkshire boy me
-
croften is yorkshire! Wherebouts in wakie u from rae?
-
long story short -sold dk an admin on here a g40, but few bits were missing. After months of arguiung he sent them seemingly damaged them before sending according to dk
-
from pontefract area, but i tend to be in wakie quite a bit
-
i took a gamble in him seen as he's liked on club polo and he has been fine with me always replied to mgs quickly and the pulleys came in 3 days royal mail recorded as agreed but i did pay him paypal so if he tryd owt funny i had some come back
-
oryt paz so did you win the ones off ebay then yes, dont supose you have tried fitting them yet have you mate haha, asin have you come across any problems lol
-
na i sent him a mgs thru club polo lol na not fitted them yet can see me have problems with fitting will probly fit them nxt weekend as im busy this weekend with my mates rover lol
-
oryt rover haha say no mor mate, so ud recomend i gt sum off him n stop worying then ye haha, u got correct chip and that to run them ye
-
yea iv got rite chip coz iv already got a 65mm pulley jus wanted toothed to get rid of belt slip and there lighter
he's been good with me if you do deal with him use paypal like i did and you should be fine
-
oryt ye corse cz i will be afta a chip and belt myn is still standard, i am just wary as i dont actualy no much about thes pullies haha jus no i need some lol, but these are the ones i want ye they are wat they say yes
chears mate
-
yea toothed pulleys are best and psd ones are the best you can get and if u do get them you can get a belt
of pete on here
-
ye ye av seen that post mate cheers, so ye looks liky like i might av to purchase a set then thnx for all the help ye