aiming for 150bhp?

[sinister polo]

hi all,

im aiming to get a reliable 150bhp from the g,
the mods i will be running are as follows:

full blend charger,
65mm pulley,
ss 4-2-1 manifold and full exhaust system,
forge front mount intercooler,
gt inlet manifold,
and a chip to suit.

will this get me the power im after?
any other modifacations u can think of that will help me get there!

cheers

daryl

[hayesey]

sounds reasonable.  You'll also need to do something with the standard airbox.  Either remove the restrictions from inside it and fit a decent panel filter or replace it with a cone filter and heat shield.

[jez1272gt]

Dont forget with more power comes the need for better brakes and suspension as well 

[Dan]

No reason why you can't get 150 BHP from the following:

65mm Pulley (toothed drive is more consistant)
Chip to suit
GT Inlet manifold
De-Restricted Airbox
Full Blend Charger

De-cat and suitable exhaust will help. Might be worth going for 250cc injectors if your getting a specific chip anyway.

[polo classic]

I would ad a cam to the above setup to be sure to hit 150+