Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Calendar
Login
Register
Club G40 Forum
»
Technical
»
Engine and Transmission
»
Co pot readings
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Co pot readings (Read 3500 times)
G40Nik
Posts: 24
Co pot readings
«
on:
May 30, 2019, 06:42:37 pm »
I did a reading check on my Co pot outerpins and meter read .835 is this high ?
Logged
sleag40
Members
Posts: 396
Poloist
Re: Co pot readings
«
Reply #1 on:
May 31, 2019, 06:20:43 am »
It doesn't matter what the reading is as long as the car runs correctly - if it passed the MOT emissions test I'd leave it alone. Mine is set at 2k+ due to bigger injectors.
Logged
G40Nik
Posts: 24
Re: Co pot readings
«
Reply #2 on:
May 31, 2019, 06:41:34 am »
Ah ok i did read somewhere it could be between 600 and 850 on tuned motors if yours is more then should be ok.
What injectors are you running?
Mine is on standard injectors was told i could go 315cc.
Logged
sleag40
Members
Posts: 396
Poloist
Re: Co pot readings
«
Reply #3 on:
June 01, 2019, 08:31:08 am »
My injectors are 310/315s - unnecessarily large, as G60 size would be fine. When the car was mapped, that was all they had in stock.
Logged
G40Nik
Posts: 24
Re: Co pot readings
«
Reply #4 on:
June 01, 2019, 09:11:01 am »
Ah cool ok what sort of power you getting with your setup?
Logged
sleag40
Members
Posts: 396
Poloist
Re: Co pot readings
«
Reply #5 on:
June 01, 2019, 09:04:26 pm »
When last on the rollers in 2012, it produced 173 bhp @ 6050rpm. When mapped back in 2008 the original injectors were maxed out at an unsafe 160bhp - hence bigger ones were required.
Logged
G40Nik
Posts: 24
Re: Co pot readings
«
Reply #6 on:
June 13, 2019, 08:00:34 pm »
Cool any idea who would do the mapping if I was to get the G60 injectors mine was originally custom mapped by PSD.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Club G40 Forum
»
Technical
»
Engine and Transmission
»
Co pot readings