[quote pid=3040 author=G-spot date=1217967585]I guess it depends on oil cooler postion too, some drain better than others(if you have one).
My routine is to take of hall sender plug, and pull out plugs then turn engine over for 1 or 2 secs to clear the oil system once everything is drained and removed, then repeat this with the new oil & filter until oil pressure comes up on gauge(this normally takes about 3.5-4ltrs). I only do this on a 10k service tho, when doing an in between service I just drop the oil and refil(about every3-4K), normally taking about 3 liters, but always top up to max after.[/quote]
Isn't a bit dangerous turning over the engine without oil...? You can propably harm a piston ring, cylinder etc.