Hi Gang,
I've got the plug marked up as COIL on the G40 engine loom, but what's the other one off the same spur?? (see picture below.)
Also, am I right in that the main 6mm power lead for the starter motor comes out around that point of the loom, (wrapped with a couple of other things - oil pressure sensors if memory serves from looking yesterday) and goes to the starter first then carries on around the sump to the Alternator?
Looking at the HAYNES manual and what I can see of the loom that's the deal but I'd like to be sure.
This one's probably a face-palm question, but there's the main M6 positive on the starter, the exciter (red/black) and another terminal too (so two male lucar type terminals as well as the main M6 power feed) - what's the second lucar for? Brain fade.
Thanks guys - nearly there now.....!
Rosco.