Author Topic: various G40 & GT bits  (Read 6161 times)

Offline grungeisdead

  • Members
  • *****
  • Posts: 822
various G40 & GT bits
« on: October 28, 2010, 02:58:38 am »
unserviced original charger - 150k - offers?
1 full blend charger needing apex seals - 300
BMW Front mount intercooler - 100
RPM Tuning 68mm pulley + matched chip - 150

also got the following healthy list of spares, may sell, please enquire

OE Charger pulleys + v-belts
G40 Alternator
G40 Engine Mount
G40 Starter Motor
G40 Pistons x 4
G40 Tappets
G40 Sump
G40/GT Passenger Rear Arch Trim
G40 Beru Lambda Probe
G40 Standard Intercooler VGC
G40 Standard Cam
G40 Charger Outlet Collar
G40 Knock Sensor x 2
G40 Various Boost Pipes
G40 Injector Rail + Loom
G40 Inlet Manifold
G40 Water Pipe Rear
G40 Charger Oil Feed Pipe - Old
G40 Charger Oil Feed Pipe - New
GT Injectors
GT Early Spec Rear LIghts
Mk3 Polo Drivers Headlight
Mk3 TCA - no rubbers
Mk3 Gearbox Mount Rear - No Rubber
Mk3 Coil - No Amp
Mk3 Rear Brake Shoes
Mk3 Heater Controls
Oil Catch Tank
Stub Axle Spacers x 6 (10mm)
Lucas 54 Calipers stripped for powdercoating + seals + pistons and bolts (no carriers)
another full blend charger needing apex seals
« Last Edit: December 06, 2010, 12:16:33 am by grungeisdead »

Offline Jezza-7

  • Members
  • *****
  • Posts: 3832
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #1 on: October 28, 2010, 07:24:12 am »
Pics of catch tank please!

Offline PeteG40

  • Administrators
  • *****
  • Posts: 4036
  • Housewives heart throb
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #2 on: October 28, 2010, 08:18:46 am »
not wanting to ruin your sale but are these the parts from demolover's car?

if so, I inspected 3 chargers that he had and got in a sale from g-spot jason from here.  You could make one good  charger (at a push) from parts... which needed a full service. The rest of the bits were fit for the bin to be honest.

Hope you don't mind me saying.

Pete

Offline grungeisdead

  • Members
  • *****
  • Posts: 822
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #3 on: October 28, 2010, 12:00:08 pm »
me and adam will pop in to see you mate, as we have a few chargers to have looked at;

the information i took was from Jasons for sale advert, and i have not set out to mislead anyone.

but i really do apprieciate the information.

catch tank - will get a pic tonight for you fella, its an ebay special


Offline Etches

  • Members
  • *****
  • Posts: 1378
  • Still got the G...
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #4 on: October 28, 2010, 12:42:46 pm »
Hey mate interested in the sump pm me a price posted

Offline newt

  • Members
  • *****
  • Posts: 85
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #5 on: October 28, 2010, 11:09:11 pm »
I'll take the passenger rear wheel arch
Pm me price

Offline youngprodigys

  • Members
  • *****
  • Posts: 545
  • G 3URO
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #6 on: October 29, 2010, 06:56:21 pm »
have you got the pipe which goes from the black plastic boost pipe before the throttle - to the idle stabilisation valve???? i well need one of them!
also - let me know how much you want for G40 charger parts....i plan to make a "cutaway" for the shelf - so all the shit bits really but has to be complete.

Offline grungeisdead

  • Members
  • *****
  • Posts: 822
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #7 on: October 29, 2010, 09:37:04 pm »
ill have a look for you mate on sunday when im back, and ive got one charger which is kaput but like you i wanted to keep it as a momento. erm illl get back to you when ive got down to see pete and had him to have a look at the chargers so i know whats what =]

Offline vwmk3jon

  • Members
  • *****
  • Posts: 1426
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #8 on: October 31, 2010, 07:17:59 pm »
Catch tank sold :)

Offline Jezza-7

  • Members
  • *****
  • Posts: 3832
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #9 on: November 01, 2010, 08:42:29 am »


catch tank - will get a pic tonight for you fella, its an ebay special



Catch tank sold :)

Cheers for them pics....

Offline dub-disaster

  • Members
  • *****
  • Posts: 1623
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #10 on: November 01, 2010, 09:38:54 am »
id be intrested in a knock sensor send me some phots of what condition there in please, and im after the bush that goes inside he front gearbox mounting rubber let me know if youve got one of these thanks

Offline grungeisdead

  • Members
  • *****
  • Posts: 822
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #11 on: November 01, 2010, 10:01:29 am »


catch tank - will get a pic tonight for you fella, its an ebay special



Catch tank sold :)

Cheers for them pics....

sorry dude you messaged me on thursday, as did jon and i met up with him at the weekend for a mates housewarming, he had a look and took it.

no bushes, buy them from vw, dont be a pikey and buy 2nd hand rubbers, you wouldnt reuse a jonny would you?!

they are as new, will *try* to get pics up tonight, but i am a busy bunny, so thats not a 100 percent definiate

Offline grungeisdead

  • Members
  • *****
  • Posts: 822
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #12 on: November 04, 2010, 10:26:04 pm »

pics of some of the parts in the following folder (will be finished in 20 mins or so, theres about 50 pics)

http://s16.photobucket.com/albums/b12/yousafn/G40_Parts/

Offline JayG40

  • Members
  • *****
  • Posts: 8
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #13 on: November 12, 2010, 08:22:46 pm »
Hello mate how much for the alternator

Thanks, James

Offline 10pin

  • Members
  • *****
  • Posts: 60
Re: various G40 & GT bits chargers/pulleys/decats/full stainless system
« Reply #14 on: November 12, 2010, 09:50:46 pm »
Yo

how much would do you want for the intercooler and would you be prepared to post it?

cheeers