Club G40 Forum

Classifieds => Wanted => Topic started by: garye40 on August 04, 2009, 11:14:37 pm

Title: map for 310cc injectors for new G40
Post by: garye40 on August 04, 2009, 11:14:37 pm

On my old one I had a chip from psd for a 1272 cam 310cc injectors I dont think it really was all that I reckon it was same premapped for 1341cc setup anyway I need a safe map chip for 310cc injectors I have eaton awt full kit etc gt inlet dewedged throttle etc
I wanna get it remapped on road eventually anyway so close
 to this would help me cheers

Title: Re: map for 310cc injectors for new G40
Post by: polo classic on August 05, 2009, 01:15:26 pm

If you have a 1272cc, I'd say the redtops are too big. Ona 1341cc, it is difficult to set up the injectors to open and close fast enough on idle, as they are too large for the little engine.

Title: Re: map for 310cc injectors for new G40
Post by: Robin on August 05, 2009, 05:23:39 pm

you will fine with 310cc injectors on a 1272cc as long as you have the correct map.

hayes is running 310cc injectors on his 1272cc, contact Andy from PoloPerformanceParts and he will be able to help you out as he is currently the G40 mapping Guru!