Club G40 Forum
Technical => Superchargers / G-Lader => Topic started by: TomG401991 on December 05, 2008, 01:18:13 pm
-
hey im thinking about fitting a boost gauge to my G40.
is this possibe and iff so where do you connect the hoses and wires etc.
any help much apriciated
tom.
-
Yes it is possible, you will need to connect the pipework via a "t" piece into an existing vaccum pipe.
As for the wiring, just hook it into any switched live.
-
A popular pick up is the vacumm hose that feed's the fuel pressure eg, just a simple 'T' off that is normally ample to feed any gauge requirements.
-
any pictures or better descriptions of this hose as i dont wana be snipping any vital wires/hoses
cheers tom
-
Just avoid the vacumn that goes to the ECU.
-
i have one mate il take photos tommorrow for you
-
cheers mate would be alot of help
-
I can get a pic of mine. I've got + and - running through a fused wire to the battery. Not wired in at mo as it only powers the light to see it at night.
-
i wire the gauge lighting to the illumination wires of the fag socket. It dims with the thumbwheel under the headlights then!!!
-
Didn't think of that!
-
mine needed a permanant live premanent ground and an ignition live i just used a multi meter to find the on the light switch and wired it via that then mounted it just next to the light switch ill get a picture and show you all (Y)
-
this is how mine is fitted ;D