Club G40 Forum

Technical => Chassis & Braking => Topic started by: paulpolo on November 18, 2014, 09:25:00 am

Title: Fitting Poly engine mounts
Post by: paulpolo on November 18, 2014, 09:25:00 am

I've got some poly engine mounts to fit has anyone that's done it got any tips for fitting?

Title: Re: Fitting Poly engine mounts
Post by: Matty! on November 18, 2014, 10:22:09 pm

Pretty straight forward :)

If I remember rightly I used some tubing in a vice to press them on with some copper grease.

 

Title: Re: Fitting Poly engine mounts
Post by: randombadger69 on November 19, 2014, 08:14:25 am

As above, I think I used a front suspension top retaining cup to press them with; which was a good fit around the bush. GT85 worked quite well as a lube, due to it having Teflon in it.

Title: Re: Fitting Poly engine mounts
Post by: paulpolo on November 19, 2014, 12:34:33 pm

Thanks guys i'll find a bit of tube and i'm sure i've got some spare suspension cups