Open to offers, collection from Leeds, can post
G40 Front Shock Inserts - Used - sold
G40 Cam & Pulley - 50
Polo G40 Inlet Manifolds x 2 - 35 each
G40 Polo Mk2 Standard Intercooler refurbed - 175 plus used one 125
Polo G40 Servo - 20
GT Head rebuilt with double-valve springs, sodium filled valves around 10k ago. - sold
Big valve head - 30mm/37mm - SOLD
Eaton M45 charger, pullies, belt, brackets & chip - 350
Crane cams 268/268 cam - SOLD
Schrick 268/268 - 80 needs repair to dizzy end, has cracked
G40 Exhaust Manifolds - SOLD
Dewedged G40 Throttle Body - SOLD
G40 Looms - SOLD
G40 ecu's - 100
G40 clutch and pressure plate - sold
G40 injectors - 30 for 4 or 10 each
GT injectors - sold
G40 TCA's - require new inner ARB bushes, ideal for g-ladersiete bushes. - 70
1W build - £1000
1W diesel bottom end
1W engine block with oil squirters (+ 2 spare squirters)
Block has not been bored out to 77mm - expect £100 cost for this
1W crankshaft (low miles - no wear)
Accralite 1473 77mm forged pistons - (BNIB)
(Part no 9905 x77 - Ring widths, 1.5mm/1.5mm/2.5mm)
Rods
Complete bearing set (brand new) (big end and main bearings)
Loads of gaskets including each end of the crank
Oil Pump
VAG water pump
Sump