Author Topic: ptfe spray into charger  (Read 4028 times)

Offline g40chris

  • Members
  • *****
  • Posts: 529
ptfe spray into charger
« on: May 10, 2009, 06:49:14 pm »
i sprayed some of this into the inlets as advised when running and i noticed that it changed the tone of the engine/charger for a few seconds as if the revs had dropped.

is this normal or could i have a problem somewhere

Offline scotsjohn

  • Members
  • *****
  • Posts: 967
  • Probably the oldest G driver in the Universe.
Re: ptfe spray into charger
« Reply #1 on: May 10, 2009, 08:54:44 pm »
Some spray going right through the system into the combustion chambers; normal.

Offline g40chris

  • Members
  • *****
  • Posts: 529
Re: ptfe spray into charger
« Reply #2 on: May 10, 2009, 09:01:02 pm »
cool

Offline rich4130

  • Members
  • *****
  • Posts: 47
Re: ptfe spray into charger
« Reply #3 on: May 10, 2009, 09:01:50 pm »
How long do you guys spray it in? and do you cover the inlet with something else to seal it to the can when you do it?

Offline hayesey

  • Administrators
  • *****
  • Posts: 5824
  • The CV joint killer
    • ClubG40
Re: ptfe spray into charger
« Reply #4 on: May 10, 2009, 09:24:39 pm »
yeah I used to give it some revs while doing it so the engine doesn't struggle.  I never covered the inlet up or anything, just give it a bit of revs and spray in.  Probably 3 or 4 short sprays for a second or two each.  Don't go spraying tons of the stuff.

Offline cheddarcheese

  • Members
  • *****
  • Posts: 553
  • i like boobs!
    • supercharged
Re: ptfe spray into charger
« Reply #5 on: June 19, 2009, 04:53:11 pm »
How often should you spray in to you charger?

Offline PeteG40

  • Administrators
  • *****
  • Posts: 4036
  • Housewives heart throb
Re: ptfe spray into charger
« Reply #6 on: June 19, 2009, 07:12:27 pm »
PSD used to say every 1000 miles

Offline cheddarcheese

  • Members
  • *****
  • Posts: 553
  • i like boobs!
    • supercharged
Re: ptfe spray into charger
« Reply #7 on: June 20, 2009, 11:29:09 am »
what if its a weekend G thats made to get thrashed and driven hard?

Offline Alexiskayak_7

  • Members
  • *****
  • Posts: 625
Re: ptfe spray into charger
« Reply #8 on: June 20, 2009, 01:41:29 pm »
I've sprayed some ptfe (6 short bursts) i loosed the belts and i rolled with my hand the charger and it was turning slightly hard (i have done the same test before spraying the ptfe when i had the boost return pipes). Has anybody rebuilt a charger that was using ptfe - are they lubricating ok?