Club G40
May 23, 2012, 01:05:32 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
 
   Home   Help Calendar Login Register  
Pages: 1 2 [3]   Go Down
  Print  
Author Topic: Project AAV turbo  (Read 3303 times)
cheys03
Members
*****
Offline Offline

Posts: 723



« Reply #30 on: December 18, 2010, 10:42:06 pm »

Good tip with the spoon.
The oil *stinks* of petrol and is visably thinner even when cold. Level has risen quite alot too so there must be quite a bit in there.

Cold idle is the worst for overfueling... <10:1, I presume most of the excess fuel is getting past the rings before the engine's had a chance to warm up and expand to closer tolerances. Interesting about the boost sealing the rings better. I really need to get my head into some books.

Aye when cruising at ~70mph (or just any steady mid-throttle speed) indicated AFR fluctuates between ~14.7 and 15.2 so like you say closed loop must be returning good mpg.



Logged
cheys03
Members
*****
Offline Offline

Posts: 723



« Reply #31 on: December 23, 2010, 09:11:01 am »

Fingers still crossed for decent roads for mapping over Xmas. Forge actuator turned up and will be fitted (with yellow spring) shortly. Got a green as well to fall back on in case it’s too firm. Getting itchy to drive it again.. boost is fun Grin
Logged
JregGT
Members
*****
Offline Offline

Posts: 110


« Reply #32 on: December 24, 2010, 03:19:42 pm »

Just read the whole thing again. Credit to you for doing it properly matey, bet you can't wait to get her back on the road.

Top job all round fella.
Logged
prankstar2003
Members
*****
Offline Offline

Posts: 85


« Reply #33 on: January 08, 2012, 10:11:09 pm »

Sorry to resurrect

How is this running now Chris? Did the actuator do any good? did you sort fuel leaking into sump issue.
Logged
cheys03
Members
*****
Offline Offline

Posts: 723



« Reply #34 on: January 13, 2012, 10:52:47 am »

Not at all, the thread needs updating!

The Forge Actuator is worth every penny and without faffing about hooking up your own springs and nasty bleed valves, it's the only way to properly manage the boost short of an electronic controller.

Fuel into the sump was caused by massive overfueling which was resolved with the PPP remap.

Car is running well *touch wood* . Been converted for a year now and running 1bar of boost for the last 3months or so. Nice to drive Smiley
Logged
Andy
Traders
*****
Offline Offline

Posts: 846



« Reply #35 on: January 13, 2012, 02:31:52 pm »

running 1bar of boost for the last 3months or so
Good man! Still doing decent economy too?
Logged
cheys03
Members
*****
Offline Offline

Posts: 723



« Reply #36 on: January 13, 2012, 09:45:19 pm »

running 1bar of boost for the last 3months or so
Good man! Still doing decent economy too?
Hehe, cheers! yeah, it'll happily do 42mpg+ Mon-Thurs, on Friday, Sat and Sun the economy drops a little Smiley

Edit: I stopped being a cheapskate and run it on 97+ron fuel now btw!!
« Last Edit: January 13, 2012, 09:53:26 pm by cheys03 » Logged
cheys03
Members
*****
Offline Offline

Posts: 723



« Reply #37 on: January 26, 2012, 08:05:53 pm »

Parts list now in the FAQ section:
http://www.polog40.co.uk/forum/index.php/topic,7962.0.html
Logged
Pages: 1 2 [3]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!