Club G40
May 21, 2012, 10:37:30 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
 
   Home   Help Calendar Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: K03 Air Filter Set Ups  (Read 1104 times)
Max
Members
*****
Offline Offline

Posts: 471


G40less


« on: April 14, 2009, 08:51:47 pm »

Chaps,

What sort of air filter set ups are you running?  I was thinking just a reducer off the turbo onto a bigger straight pipe attached to the filter.  Or maybe work one around something like a Jabba heatshield and filter combo?

Any ideas and pictures would be great!
Logged
hayesey
Administrators
*****
Offline Offline

Posts: 4683


The CV joint killer


WWW
« Reply #1 on: April 15, 2009, 08:26:09 am »

mines a bit of a mish-mash of bits really.  The inlet to the turbo is tiny really.  I've got a piece of 44mm ID silicon which fits onto the turbo inlet.  Then clamped two pieces of progressively bigger silicon bits I had knocking about in my garage over the top of that, the end result was then big enough to clamp on the ducting and filter I already used with the g-lader.  You could probably buy a reducer that would look nicer but I just used what I had lying about for the time being.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!